⚙️
🌟 Najlepsze dopasowanie
Wpisz szukaną frazę, aby zobaczyć propozycje AI.

Best practices for creating identifiers for products and other objects for their automatic identification

Best practices for creating identifiers for products and other objects for their automatic identification
Photo: Depositphotos

In order to meet market requirements, improve production, logistics, and trade processes, and comply with EU regulations, products across various industries must be uniquely and automatically identified in accordance with AIDC standards. Any company or institution wishing to assign unique global identifiers to any objects must be a participant in a system managed by a specific Issuing Agency (IA).

 

As part of the BatteReverse project, best practices were developed for creating and using the most effective coding designations. To this end, one of the 50 IAs was selected, which offers the most advantageous AIDC standards in many respects – GS1. A comprehensive generic list of objects recommended for identification according to GS1 was formulated, and recommended global and internal identifiers were selected for each of these groups. The article presents best practices for creating recommended identifiers, formulated on the basis of over 35 years of research and implementation of the AIDC system in many sectors and companies across various industries, which should be used by those implementing AIDC.

Formal and legal principles for creating global identifiers

All global identifiers for any objects, in accordance with ISO/IEC 15459 standards, required among others by EU Regulation 2023/1542 regarding battery passports, must contain an Issuing Agency Code (IAC) and an identifier element assigned by it. To obtain these designations, every company must apply to the appropriate Issuing Agency (IA), in this case – GS1.

The GS1 system was developed in 1973 in the USA by the Uniform Product Code Council, known until recently as the Uniform Code Council, Inc. (UCC). In 1977, the European Article Numbering Association, known as EAN International, created a compatible system so that it could be used outside North America. In 2005, the EAN and UCC organizations officially established the joint international organization GS1 (Global System 1), with the Global Office (GO) in Brussels (Belgium) and Ewing (USA), which manages the system worldwide.

GS1 is also an international system of standards and business solutions, created on the initiative and under the leadership of the system’s participants, mainly manufacturers of products from various industries and representatives of other economic sectors. It has been systematically developed since its inception, responding to market needs. GS1 standards constitute agreed-upon rules and guidelines that are applied uniformly by companies/entities to improve operations in supply chains. More information about the organization and GS1 standards can be found at www.gs1.org.

GS1, as an IA, operates in the largest number of countries in the world. At the national level, the administration of GS1 standards is the responsibility of so-called GS1 Member Organizations (MOs), which register, inform, train, advise, and actively support users of GS1 standards. GS1 is the only one of the 50 IAs to have representative offices (MOs) in all European countries, including the 28 EU member states. There are over 100 GS1 national organizations worldwide (currently 118), e.g., Middle East and Africa – 27, Americas – 21, Asia Pacific – 27. In Europe, there are 42 (Belgium and Luxembourg share one common national GS1 organization). GS1 national organizations also create cooperation forums for users, enabling them to exchange experiences and actively participate in the development of standards.

Each GS1 national organization receives a 3-digit prefix from the GS1 Global Office in Brussels, which is an element of every global GS1 identifier.

Table 1. List of GS1 prefixes of GS1 national organizations operating in individual European countries

Prefix / prefixes of GS1 national organizations in Europe
530 Albania 400 – 440 Germany 590 Poland
485 Armenia 520 – 521 Greece 560 Portugal
900 – 919 Austria 599 Hungary 594 Romania
481 Belarus 569 Iceland 460 – 469 Russia
540 – 549 Belgium 539 Ireland 860 Serbia
387 Bosnia and Herzegovina 800 – 839 Italy 858 Slovakia
380 Bulgaria 475 Latvia 383 Slovenia
385 Croatia 477 Lithuania 840 – 849 Spain
529 Cyprus 540 – 549 Luxembourg 730 – 739 Sweden
859 Czech Republic 531 Macedonia 760 – 769 Switzerland
570 – 579 Denmark 535 Malta 868 – 869 Türkiye
474 Estonia 484 Moldova 482 Ukraine
640 – 649 Finland 389 Montenegro 500 – 509 United Kingdom
300 – 379 France 870 – 879 Netherlands
486 Georgia 700 – 709 Norway

Source: Own study based on GS1 General Specifications.

 

In most countries of the world, GS1 national organizations have one prefix, e.g., Poland – 590. The first European countries, founders of the EAN System, did not foresee the expansion of the GS1 System to all continents and assigned 2-digit GS1 prefixes to their national organizations. After the expansion of the GS1 System, it was necessary to switch to 3-digit GS1 prefixes, which is why some GS1 national organizations have 10 prefixes instead of one. There are also cases of countries whose organizations, for various reasons, e.g., historical and organizational, have a different number of GS1 prefixes.

Each global GS1 identifier contains in its structure a so-called GS1 Company Prefix (GCP). The GCP consists of: the GS1 national organization prefix and the number assigned to the company by that national organization. If a company is not yet a participant in the GS1 System, it applies to its GS1 national organization. Each company can register with its GS1 national organization by filling out the appropriate application, in which it specifies the pool of GS1 identifiers it needs. Currently, each national organization, when registering a company, assigns it a GCP number, which currently consists of a 3-digit GS1 national organization prefix and a multi-digit number assigned to the company, the number of digits of which depends on the pool of numbers ordered by that company.

GS1 national organizations offer several pools of numbers, most often numbers for products – GTIN, e.g., up to 100, up to 1000, up to 10,000, and up to 100,000. When choosing a pool of numbers, it is recommended to mainly consider the need for GTIN numbers, because it will be, for example, the same pool of numbers for locations – GLN and 10,000 times larger pool of numbers for logistics units – SSCC. It is recommended to apply for the target GS1 number pool. For example, if a company currently produces about 80 different types of products, it is recommended to apply for a pool of up to 1000 numbers, because it may turn out soon that a pool of up to 100 numbers is insufficient.

In the event that a company did not foresee such a large increase in the produced product assortment, it can in any case apply for another pool of numbers, but then it will have to use two different GS1 Company Prefixes.

Each company, having its GCP number, can create any types of global identifiers for its various objects, according to its needs. If a company has several GS1 Company Prefixes, it can create global GS1 identifiers based on each of the prefixes.

In the case of identifying trade products, the right to assign GTIN numbers belongs exclusively to the owner of the trade brand or another company authorized by them, e.g., the manufacturer, when, for example, the owner of the trade brand is not the manufacturer of their products themselves or is not yet a participant in the GS1 System.

GS1 Company Prefixes and global GS1 identifiers cannot be sold, leased, or given away in whole or in part for use by another company. The same rules for assigning global GS1 identifiers and using GCP numbers apply in all countries, even in situations where organizational and legal conditions change. There are also strictly defined rules for the use of GCP numbers in situations of changing the legal status of a company, resulting from, for example, acquisition, merger, partial: purchase, sale, division of a company, or separation of a part of a company from the parent unit. GS1 System participants should notify their GS1 national organization of any change in legal status within one year of that change. GS1 national organizations may adapt guidelines to the legal requirements of a given country.

Structures of recommended global identifiers

In GS1, in accordance with ISO/IEC 15459 standards, all global identifiers for any objects start with the Issuing Agency Code (IAC), which for GS1 includes all digits – from 0-9, and contain the identifier element assigned by it. This is the 3-digit GS1 national organization prefix. Most global GS1 identifiers after this prefix contain the number assigned to the company by its GS1 national organization, together forming the GS1 Company Prefix (GCP). The company uses the same GCP to create most global identifiers, e.g., for products: GTIN, for formal-legal and physical locations – GLN, for logistics units: SSCC, for assets: GIAI, for documents: GDTI. The basic structures of recommended global identifiers are presented in Table 2.

 

Table 2. Basic structures of recommended global GS1 identifiers

Global

identifier

IAC

Check digit

GS1 Company Prefix – GCP Designation assigned by the company Check digit Additional part
GS1 national organization prefix per IAC Number assigned to the company
GTIN-13 – or 0 NNN from J1 J2 J3
to J1…J8
from T1…T6
to T1
K –
SSCC D NNN from J1 J2 J3
to J1…J8
from S1…S5
to S1…S10
K –
GLN – NNN from J1 J2 J3
to J1…J9
from L1…L6
to –
K –
GRAI 0 NNN from J1 J2 J3
to J1…J8
from T1…T6
to T1
K format an..16
GIAI – NNN from J1 J2 J3
to J1…J8
– – format an..24

format an..19

GDTI – NNN from J1 J2 J3
to J1…J8
from D1 … D6
to D1
K format an..17

 

Source: Own study based on GS1 General Specifications

 

The next part of most global identifiers is created by the company. A total of 12 digits in GTIN-13, GLN, GRAI, and GDTI identifiers end with a check digit.

Furthermore, two of the presented identifiers: GTIN and GRAI are padded at the front with a non-significant zero, and SSCC – with an additional digit from 0-9, expanding the pool of these identifiers. Two of the mentioned identifiers: GRAI and GDTI can be supplemented with any individual designation within the same type of object or document. In turn, the GIAI identifier immediately after the GCP contains an internal object designation.

As follows from the presented structures of recommended global GS1 identifiers, most of them are numeric and have a similar structure. Table 3 presents sample detailed structures of the world’s most popular identifier, GTIN-13, applicable in Poland. In other countries of the world, including EU countries, the structure of GTIN-13 is similar.

 

Table 3. Structure of the product identifier – GTIN-13 number applicable in Poland

GS1 Company Prefix – GCP Product type designation assigned by the company Check digit
GS1 national organization prefix Number assigned to the company
590 J1 J2 J3 J4 T1 T2 T3 T4 T5 K
590 J1 J2 J3 J4 J5 T1 T2 T3 T4 K
590 J1 J2 J3 J4 J5 J6 T1 T2 T3 K
590 J1 J2 J3 J4 J5 J6 J7 T1 T2 K
590 J1 J2 J3 J4 J5 J6 J7 J8 T1 K
E.g. 590 1234 00001 7

Source: Own study based on GS1 Poland materials

 

A company, when registering in the GS1 System, should take into account the target needs regarding the pool of GS1 identifiers, with particular emphasis on the assortment of its trade units, e.g., batteries, recycled products, in order to identify them with GTIN numbers. The right to assign GTIN numbers belongs mainly to the owner of the trade brand of the products identified by that company, or possibly another company authorized by them.

Best practices for creating global GS1 identifiers

As follows from the structures of global identifiers, it is the company’s responsibility to create the part of the designation that uniquely identifies the type of object belonging to a given group on a company scale, by assigning it a numeric designation. Below are best practices for the company to assign this part in individual global identifiers.

In GTIN, the product type designation assigned by the company cannot be repeated on any other type of product of the company that differs generically and functionally from another, taking into account parameters significant for the manufacturer, trader, and user, e.g., shape, color, dimension, and regarding batteries: technical parameters, e.g., battery type, rated voltage in V, capacity in Ah, weight in kg, etc. It is recommended to assign consecutive numbers, e.g., having a pool of 10,000 numbers (T1 T2 T3 T4), the company’s subsequent products will be marked: 0001, 0002, etc. A GTIN once assigned to a given type of product cannot be reused to identify another type of product.

In GLN, the designation of a formal-legal or physical location assigned by the company identifies it, e.g., as a supplier, manufacturer, recipient, including a participant in reverse logistics, and its branch or division, i.e., as a functional-legal location identifier for the needs of passportization, automatic identification (AIDC), and electronic data interchange (EDI), and as global physical location identifiers, e.g., places of production or service provision, as well as warehouses, storage yards, staging areas, rack slots, shelf locations, etc. The pool of GLN numbers is the same as the pool of GTIN-13 numbers. The structure within the location designation assigned by the company and information related to that location are at the discretion of the company defining the given location. For the purposes of formal-legal identification of the company and the address of the company’s main headquarters, it is recommended to enter only the digits “0” in place of the individual internal location number. The company, having the remaining pool of numbers, uses them to define internal individual GLN locations, e.g., detailed storage locations for supply materials and/or finished goods in warehouses. It is recommended to assign consecutive numbers within the individual internal location number, e.g., having a pool of 10,000 numbers (L1 L2 L3 L4), subsequent internal locations will be marked: 0001, 0002, etc.

In SSCC, i.e., in the global identifier of each logistics or transport unit, the first digit is the IAC code, i.e., digits from 0 to 9. This check digit initially meant the type of logistics packaging. Currently, it is used to increase the capacity of the SSCC number. Its use depends on the company that creates logistics labels. It is recommended to start with 0 when logistics labels are printed centrally, or it can be used to distinguish separate GS1 logistics label printing points when the IT solution does not allow for central assignment of serial numbers. The serial number is assigned by the company from the pool of numbers it possesses. It is recommended to assign consecutive numbers for each logistics unit, e.g., when a company has the number J1 J2 J3 J4 J5, then S1 S2 S3 S4 S5 S6 S7 S8 for the first logistics unit = 00000001, for the next: 00000002, etc. …, until 99999999, i.e., until the pool is exhausted. SSCCs should not be duplicated for a minimum period of 1 year, and if the logistics unit contains products with longer durability and storage time, then for a period no shorter than that resulting from the specificity of the product.

GRAI as an identifier for returnable assets contains a mandatory part – GTIN and an optional part, in order to distinguish individual objects within the same type. GTIN identifies the type of object, e.g., returnable packaging, machine, device. If it is a GTIN-13, it must be preceded by one zero – 0. If there is a need for more detailed identification of a given object, this designation can be supplemented, as needed, either with a serial number of the given type of object or with a production batch. This part of the designation can be alphanumeric and contain up to 16 characters.

GIAI as an individual asset identifier is recommended to be used to mark objects such as: returnable packaging, machines, devices that do not have a GTIN number, but for AIDC needs, they must be marked with a global identifier. The structure of GIAI is created by the mandatory part: GS1 Company Prefix – GCP and the internal object designation, e.g., an internal arbitrary individual object identifier, which can be alphanumeric, and the permissible number of characters depends on the number of GCP characters. In total, there cannot be more than 30.

GDTI as a global document identifier, used especially in relation to the company’s environment, is created by a mandatory part, which has the standard structure of 13-digit GS1 identifiers, and an optional part: individual document designation within a given document type. The document type identifier is assigned by its creator. For this purpose, the company uses the pool of numbers at its internal disposal. It is recommended to assign consecutive numbers, e.g., having a pool of 10,000 numbers (D1 D2 D3 D4), the company’s subsequent document types will be marked: 0001, 0002, etc. Also, the individual designation of a given document type – its serial number and information related to this document, are at the discretion of the company defining the given document. Combining the document type with the additional part allows for uniquely identifying each individual document. This additional part, of variable length, is alphanumeric and can contain up to 17 characters. Most often, it is a consecutive number in a given calendar year with the year designation, assigned to a given document type.

Except for GIAI, all other global and internal GS1 identifiers have a numeric part that ends with a check digit.

The check digit, which is used to detect errors in reading GS1 identifiers, is calculated according to a fixed standard GS1 algorithm, common to all global and internal GS1 identification numbers. The check digit is calculated from all the digits preceding it. It is recommended to introduce the GS1 algorithm into the software in which subsequent identifiers are created, e.g., calculating check digits in SSCC is recommended to be left to the program printing GS1 logistics labels. Check digits can also be calculated, e.g., using free programs posted on the GS1 organization’s website: https://www.gs1.org/services/check-digit-calculator or on the websites of one’s own GS1 national organization, e.g., in Poland on the website: https://gs1pl.org/kalkulator-cyfry-kontrolnej/. In these programs, one can calculate the check digit for a single number by entering, for example, the first 12 digits. For example, on the GS1 Poland website, there is also a simple program available, with which one can calculate check digits simultaneously for a group of consecutive GS1 identifiers by entering a range of several or several dozen numbers.

Best practices for creating standard internal GS1 identifiers

GS1, alongside global identifiers, offers two basic solutions for internal use only:

  • using numeric internal identifiers, so-called RCN numbers – Restricted Circulation Numbers, which are compatible with global identifiers;
  • using arbitrary non-standard internal identifiers, with the use of GS1 Application Identifiers – AI, intended exclusively for internal use.

RCN numbers

Individual GS1 national organizations decide on RCN numbers with a prefix part, the detailed structure of these numbers, and their local application, most often within one country. These identifiers are also used to mark retail products with variable quantity, and for the same products, they must be adapted to recipients in a given country. Other RCN numbers are intended for internal identification of any objects in a given company or institution, and objects marked in this way cannot leave the premises of the given company or institution. These are 8, 12, and 13-digit numbers with specified prefixes for internal applications. Their use is recommended especially when:

  • objects, including especially supply materials, have not yet been marked with GTIN numbers,
  • the company does not yet use standard internal identifiers for AIDC needs.

Since in practice the most commonly used identifier is the 13-digit identifier, it is recommended, for the sake of simplifying the transition from RCN to GTIN or other global identifiers, to use a 13-digit RCN number with a prefix for any applications, i.e., RCN-13 with the prefix 04. The selected numeric identifier RCN-13, with the prefix 04 (with format n13), as the simplest and most commonly used, is recommended to be used for internal identification of piece objects. Its basic structure is presented in Table 4.

 

Table 4. Basic structure of the standard internal identifier RCN-13

GS1 Prefix Internal object designation Check digit
04 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 K

Source: Own study based on GS1 General Specifications

 

The GS1 prefix 04 means that no object arriving at the company will be marked using it. The structure within the internal designation for objects from N1 to N10 is at the company’s discretion. The company uses the pool of numbers at its internal disposal, determining numbers within the possessed pool depending on needs. Most objects are piece objects such as products, machines, employees, internal locations, and some products have a variable quantity in the packaging. Some objects require unique internal identification with accuracy to their type, and some – with individual accuracy, e.g., employees. Depending on needs, within the possessed pool of numbers, one can additionally separate types of object groups by distinguishing them. For this purpose, in the RCN number, for the identification of individual groups of objects, one or two consecutive digits occurring after the prefix 04 can be allocated: N1 N2 – as an internal application prefix, e.g.:

  • 01 is supply materials not marked by suppliers according to GS1 and other piece products, e.g., semi-finished products,
  • 02 is machines and devices, e.g., forklifts, etc.,
  • 03 is locations in warehouses,
  • 04 is employees,
  • 05 is internal documents,

and the remaining digits are allocated to determine:

  • either the type of a given object belonging to a given group of objects,
  • or the individual number of each object belonging to a given group, e.g., as an employee identifier.

Digits from, e.g., N3 … N10 give for each group of objects as many as 100 million possible designations if consecutive numbers are entered for marking, starting from 00000001. The recommended structure of internal 13-digit numbers (format: n13), adopted for identifying objects within groups of identified objects distinguished in the company, is presented in Table 5.

 

Table 5. Structure of the RCN-13 number selected for internal applications of marking objects belonging to a given group

GS1 Prefix Internal application prefix Internal object designation Check digit
04 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 K

Source: Own study

 

In order to determine a specific type of a given object or the individual number of each object belonging to a group of objects identified by the internal application prefix – N1 N2, it is recommended to assign consecutive numbers within the available pool of 100,000,000 numbers (N3 N4 N5 N6 N7 N8 N9 N10): 00000001, 00000002, etc.

The check digit for each 13-digit numeric GS1 identifier is calculated according to the standard GS1 algorithm, and the recommended ways of calculating it are the same as those presented for global GS1 identifiers.

RCN-13 designations with the GS1 prefix: 04 are used exclusively for internal application. Ultimately, e.g., when supply materials are marked by suppliers according to GS1, the company will replace the internal RCN-13 designation in the database with the global GTIN-13 number, using the supplier’s code designation. Furthermore, there will be no need to mark these products independently, which will reduce the costs of using AIDC.

Non-standard identifiers with Application Identifiers for use within the company

Every company or institution, in accordance with GS1, can also use non-standard internal identifiers that will be compatible with global and internal RCN identifiers when they are defined by qualifiers specifically for these purposes – AI, i.e., GS1 Application Identifiers: from 91 to 99. Using them exclusively for internal use, there is no need to change the non-standard internal object identifiers introduced after them, because the permissible format of these designations is alphanumeric and has recently been expanded from 30 to 90 characters (format: an…90).

At the same time, it is recommended, in the case of using RCN-13 for internal identification of products with variable weight or products requiring other additional supplementary data, to reserve:

  • AI 91 for identifying products as references to AI 01,
  • AI 92 for identifying the content of products in a logistics unit as references to AI 02.

The remaining AIs from 93 to 99 are recommended to be used for internal identification of individual remaining groups of objects, identified by non-standard internal identifiers.

Example of using RCN identifiers with AI

Products with variable quantity, e.g., non-retail units with variable weight, are identified by 14-digit identifiers, where the additional first digit is always the digit “9”, creating a GTIN-14 number, and when the supplied product with variable quantity has not been marked by the supplier according to GS1 – it is recommended to use RCN-14 with the first digit “9”. In the code designation for such products, its actual quantity must additionally be provided, e.g., the net weight of a given product and possibly other data, all using appropriate GS1 Application Identifiers – AI. In the case of products with variable quantity, it is recommended to use AI 91, after which RCN-14 is entered, denoting a specific type of product with variable quantity in packaging or without (e.g., when it is a product with variable, e.g., length and does not require packaging). Its variable quantity is presented by AI from the 3nnn series, selected appropriately for the type of measure and its accuracy, e.g., AI 3103 when it is a product with variable weight, which is to be expressed in kilograms, with accuracy to the gram.

Objects marked in this way cannot leave the premises of the given company or organization so that they do not duplicate with the internal designations of other companies.

As part of the BatteReverse project, a list of GS1 Application Identifiers (AI) recommended for use in companies of various industries, including reverse logistics of car batteries, was additionally formulated, as well as their recommended sets for: products in various packaging, trade, and logistics forms, and for all other groups of objects whose unique, global, and internal, as well as automatic identification brings benefits and meets the requirements of EU regulations. But that is a topic for the next article – we invite you.


The article is the full version of the article under the same title, published in the Logistyka magazine no. 4/2026.

 

Previous parts of the series: