
Old industrial halls can be effectively modernized without demolishing the entire facility. In many cases, sandwich panels with a PIR core or mineral wool allow for improved insulation, airtightness, and fire safety, while simultaneously shortening the investment time.
Why is it worth modernizing an old hall?
Many older industrial facilities still have a good load-bearing structure but poor external cladding. This means high heat loss, moisture problems, leaks, and difficulties in maintaining comfortable working conditions. Modernizing a hall with sandwich panels allows these problems to be solved without building a new facility.
A well-designed thermal upgrade can also increase the property’s value and reduce operating costs. In practice, it often turns out that the greatest effect comes not from replacing the cladding alone, but from a comprehensive approach to the entire building envelope.
When is a hall suitable for modernization?
Not every hall can be immediately covered with new panels. First, it is necessary to check the condition of the load-bearing structure, foundations, connections, and existing cladding. If steel elements are corroded and the structure has defects or deformations, prior repairs may be necessary.
What needs to be assessed before starting work?
- the condition of columns, girts, girders, and purlins,
- the load-bearing capacity of foundations and anchorages,
- the condition of the old cladding,
- the possibility of transferring additional loads,
- the impact of the new facade on the building’s airtightness and ventilation.
In the case of halls currently in use, it is also necessary to consider the method of carrying out the work, production protection, and the possibility of staging the work.
Which sandwich panels should you choose?
The choice of panels should depend on the hall’s function and design requirements. Panels with a PIR core are a good choice where very good thermal insulation is important with a relatively small partition thickness. On the other hand, panels with a mineral wool core are primarily suitable where fire safety requirements and fire resistance are the priority.
PIR or MiWo?
PIR roof panels or wall panels are usually the choice when the investor wants to limit the thickness of the structure while achieving a high level of insulation. MiWo works better in production and industrial facilities where fire safety, fire resistance, and additional favorable acoustic properties are important.
In practice, the choice should not be based on the cost of the material alone. More important are the building’s requirements, its method of use, and the expected effect of the modernization.
Dismantling the old cladding or installing over the existing one?
This is one of the most important design decisions. In many halls, the old cladding can be completely removed and a new layer created from scratch. This solution provides greater control over details but requires a larger scope of work and usually means higher organizational costs.
The second option is to leave the old cladding and install a new layer on an additional sub-structure. This solution can be beneficial when the hall must remain operational during modernization and the existing partition is still stable.
When is dismantling better?
- when the old cladding is corroded or deformed,
- when there are moisture problems,
- when the existing layer prevents the correct installation of new panels,
- when full control over the partition layout is required.
Thermal bridges and moisture
Modernizing an old hall is not just about improving the heat transfer coefficient. Thermal bridges, which can form at columns, foundations, corners, gates, windows, and the connections between the old and new cladding, are of great importance.
If the new partition is poorly connected to the existing structure, water vapor condensation, dampness, and accelerated material degradation may occur. Therefore, before installing the panels, it is worth analyzing not only the loads but also the behavior of the partition under actual operating conditions.
Hall modernization and energy savings
A well-executed thermal upgrade can significantly reduce heating costs. In practice, the greatest energy losses result not only from walls and roofs but also from leaky gates, old windows, skylights, and structural connections.
It is therefore worth treating modernization as a complete system of actions rather than a single material replacement. The sandwich panel itself will improve the partition’s parameters, but the full effect is only achieved by combining it with the modernization of joinery, gates, and details.
Most common mistakes in hall modernization
In such investments, mistakes are most often made related to the lack of a full technical assessment of the facility, ignoring thermal bridges, and designing only the facade without considering the entire hall. Another problem is underestimating details, especially at plinths, corners, and installation passages, or incorrectly selecting sandwich panel flashings.
Another mistake is the lack of a moisture analysis when leaving the old cladding. As a result, the new layer can trap moisture in the partition and accelerate damage.
When is modernization profitable?
Modernizing an old hall usually makes sense when the load-bearing structure is still in good condition and the main problem is poor cladding. In such cases, covering the hall with modern sandwich panels allows for a quick improvement in comfort, aesthetics, and energy efficiency.
However, if the structure is heavily degraded and repairs would be very expensive, it sometimes turns out to be more profitable to demolish and build a new facility. The decision should be based on a technical analysis and total costs, not just the price of materials.
How to turn an old structure into a modern industrial facility?
Renovating an old hall is a complex engineering process in which the profitability of the investment depends on a reliable technical assessment and the choice of reliable technologies. Since material errors at this stage can negate all the effort put into the modernization, it is crucial to use systems that uncompromisingly deal with building physics. The answer to these requirements is ARPANEL sandwich panels – a modern premium panel manufacturer.
Thanks to the use of advanced ARPANEL wall and roof panels with an innovative PIR core or non-combustible mineral wool (MiWo), the investor gains certainty that the new cladding will effectively eliminate the problem of thermal bridges and uncontrolled heat loss. Precisely designed system locks guarantee full airtightness and protection against moisture, while also making it easier to meet strict fire protection requirements. In this way, using proven materials, worn-out and inefficient industrial halls can gain a second life, becoming aesthetic and energy-efficient facilities that meet modern technical standards.








