
Every day, more than a million tons of plastic are produced worldwide. In the EU alone, 19 million tons of non-recyclable plastic waste are generated annually. Up to 75% of this is sent to landfills or ends up directly in the natural environment. A Polish company has developed a technology that enables the recycling of mixed polymers. The final product of this recycling is a liquid hydrocarbon that can be used as a raw material for producing clean plastic or as standard fuel components.
– The technology of plastic waste cracking has been known for 40 years. It is enough to heat long polymer chains so that they break down into shorter ones, becoming the same product that is obtained from crude oil in a refinery. However, until now, there was no technology capable of effectively and waste-free heating plastics, which are by nature solids with very high viscosity and low thermal conductivity, making them difficult to heat because they burn, – says Adam Hańderek, CEO of Handerek Technologies.
Estimates from PlasticsEurope show that in 2020 alone, 367 million tons of plastic were produced. Only about 1% undergoes biodegradation. Plastic waste management is an increasing problem, and up to 75% of it is stored in landfills or ends up directly in the natural environment. In the EU alone, 19 million tons of non-recyclable plastic waste are added every year. Incineration is one of the most expensive methods of energy production and waste disposal. Compared to recycling, it also generates nearly three times more greenhouse gas emissions and captures only 20% of the energy contained in plastic. However, the most commonly used plastic cracking is not an ideal method.
– We managed to find a solution that prevents this phenomenon, and thanks to this, we can produce hydrocarbon fractions from this plastic waste, which on one hand can be components of motor gasoline, and on the other, components of, for example, diesel fuel. And we have such analyses and studies from certified laboratories that show that components produced from plastic waste meet all standards regarding the quality of motor fuels in Europe, – explains Adam Hańderek.
The Polish company’s technology processes plastic waste that is not suitable for recycling, such as dirty films, multi-material packaging, all kinds of consumer packaging, as well as industrial waste. During the recycling process, the plastic goes to a depolymerization reactor, where a catalytic thermal process breaks down polymer chains into C1 to C24 hydrocarbon vapors, which can be condensed into clean oil with very low sulfur content, used for heating, energy production, or fuel. The resulting liquid hydrocarbons are then fractionated according to boiling point into various hydrocarbon products, such as gasoline and diesel. These can then be used as a raw material for the production of recycled plastics or low-carbon alternative fuel, which can be mixed with traditional crude oil-based fuels.
– You can produce so-called RDF fuel from plastics, which is used in cement plants and waste incinerators. But if we are talking about liquid fuels, we can produce a gasoline fraction, i.e., a motor gasoline component, a diesel fraction, i.e., a diesel component, and we can even produce fuel for jet engines. One of our collaborators is conducting research on the use of our components as rocket fuel, – lists the CEO of Handerek Technologies.
Thanks to the technology developed by the Poles, one liter of liquid fuel can be produced from 1 kg of plastic waste. Importantly, the final product is a fuel component with quality compliant with EU standards, i.e., EN590 diesel, EN228 gasoline, or aviation fuel. The efficiency of this form of recycling is estimated at 83-90%, depending on the plastic mixture, and the byproduct is dry carbon coke (2%), which can be sold.
– The fuels we use in engines must have appropriate quality, and one of the elements is the level of saturation of double bonds. For an installation processing plastic waste, this would be economically inefficient due to the costs of such large-scale installations; we managed to find a solution that allows this on a small scale – one of our plants can produce 18,000 tons per year. From the point of view of the environment and recycling, this is already a significant contribution to cleaning up the world, – emphasizes Adam Hańderek.
Large global corporations are already interested in the technology. The company announces the construction of six production plants in the near future, which could secure about 20% of the Polish market. At the same time, however, as Adam Hańderek points out, 20 million tons of fuel are consumed annually in Poland. By recycling 1 million tons of waste, it would be possible to produce a component that would account for a maximum of 5% of refinery fuels.
– In 2023, we plan to complete and launch an industrial plant with a capacity of 18,000 cubic meters of fuel components, and after that date, most likely one or the other company we are talking to will be able to add our components to their fuels purchased in refineries. Then I will be able to say how much, 5 or 10% of the fuel in the tank, comes from plastic waste and our company’s technology, – announces the CEO of Handerek Technologies.
Source: Newseria







