Transport properties of a rail vehicle in model studies

The article presents the results of studies on a rail vehicle model. The aim of the research is to increase the transport efficiency of a rail vehicle at the design stage. Commercial computer software VI-Rail, dedicated to simulation studies of rail vehicle models, was used. Among many key parameters of the rail vehicle-track model that determine the operational properties of the future vehicle, this study focuses on determining the impact of track gauge changes on the dynamic properties of the system. With a constant wheelset gauge, the properties of the model were examined for four track widths. For each case, the critical speed and the properties of the system in the sub-critical and super-critical speed ranges were determined. The studies covered movement on both a straight track and a complex track including a straight section, a transition curve, and a circular curve. The results are presented in the form of pairs of graphs showing the lateral displacements of the first wheelset as a function of travel speed, as well as the peak-to-peak values of these displacements, also as a function of speed.
The model researches of rail vehicle transport properties

Abstract

Rail vehicle model transport property researches is the subject of present article. Increase of transport efficiency of real vehicle on the initial stage of design process is main aim of this investigations. Commercial software for rail vehicle model analysis intended

VI-Rail was used. Track gauge influence on rail vehicle model dynamical properties was study. Four different values of track gauges were tested. Critical velocity value was determine for each track gauge case and vehicle properties below and above the critical velocity. The simulations in straight track as well as in curved track were performed. The first wheelset lateral displacements are observed and recorded. Pair of the bifurcation diagrams based on single simulations is a form of the results presentation. They present wheelset maximum lateral displacements absolute value versus velocity and peak-to-peak values of this displacements versus velocity too. (…)