⚙️
🌟 Najlepsze dopasowanie
Wpisz szukaną frazę, aby zobaczyć propozycje AI.

Temporary decommissioning of forklifts and batteries – how to prepare for it properly?

Temporary decommissioning of forklifts and batteries - how to prepare for it properly?

The coronavirus pandemic is a challenge for the entire world. It requires the modification or change of the operating model adopted by many companies so far. Although some sectors of the economy are observing order volumes at the same or even higher levels, a significant portion of them are already feeling the effects of closed stationary stores and reduced demand. Added to this are problems with staff on sick leave or in quarantine. Companies are often forced to limit their operations, which also translates into warehouse work. Entrepreneurs are facing the necessity of temporarily taking machines out of use, including forklifts. How to do it correctly?

What should be taken care of so that forklifts and batteries work flawlessly after being put back into operation?

Taking a forklift out of service
Every entrepreneur who is forced to take forklifts out of service for a longer period should ensure proper preparation of the room where the machines will be stored. Forklifts can only be kept in dry rooms with positive temperatures. – In the case of a short downtime, ensure the forklift is properly secured against rolling. When the forklift is taken out of service for a longer period, the device should be placed on blocks to protect the bearings and wheels from damage. In the next step, we check the level of hydraulic oil and – in the case of internal combustion forklifts – engine oil. The forklift battery should be charged. In internal combustion forklifts, do not forget to disconnect the battery terminals, clean the poles, and grease them with petroleum jelly – explains Artur Kowalski, Product Manager – Energy Specialist at Jungheinrich Polska.

Preparing lithium-ion batteries
Lithium-ion batteries must be protected from overheating. They should be stored in places where they will not be exposed to the sun or other heat sources. – Before taking a forklift with Li-ion technology out of service for longer than a week, the interface plug used for communication with the forklift should be disconnected from the battery, and the battery should be connected to a charger for a full charge. It is recommended that all available and unused batteries be constantly connected to chargers, provided, of course, that the number of devices the company has allows for it. After a full charge, the chargers will perform – if necessary – maintenance charging of the batteries, allowing the batteries to be kept in constant readiness for work – adds Artur Kowalski.

In cases where the number of chargers is insufficient, manufacturers recommend fully charging every battery taken out of use every 4 weeks. An exception is made for low-capacity batteries (40 Ah) – these should be charged every 2 weeks or more often.

Preparing lead-acid batteries
Just like lithium-ion batteries, lead-acid traction batteries should also be fully charged in the event of temporary decommissioning. Before putting them away, standard daily maintenance must be performed and the electrolyte level checked, and topped up if necessary. It is important to always do this after charging the battery. The rooms where the batteries will be stored must be dry and have a positive temperature. In the case of lead-acid batteries, do not forget about monthly equalization charging.

Proper preparation of the equipment and its correct storage during temporary downtime will prevent potential damage and will not negatively affect its service life. They will be ready for reuse while maintaining their efficiency at an unchanged level.