
Electronic consignment notes (eCMR) are intended to simplify and digitize logistics processes, eliminating paper documents. However, the implementation of the key eFTI regulation in the EU is facing significant delays. It was originally assumed that the first information exchange platforms would start operating in October 2024, and that inspections would be required to accept electronic consignment notes by August 2025 at the latest. We already know that this will not happen. Although the full application of the regulations is not expected until July 2027, it is clear that legislative work has moved forward. At the end of 2024, a draft of amendments was also published, including those to the Road Transport Act, which addresses the issue of using electronic consignment notes in Poland. What exactly is the status of eCMR implementation in our country and in Europe?
Paper still reigns in transport, although changes are inevitable
Electronic consignment notes are one of the key elements of the digital transformation in the transport sector. Replacing paper documents with digital ones is primarily intended to reduce costs and contribute to more sustainable development. The introduction of eCMR is not only a step towards ecology but also a real facilitation for transport companies. Digitization of documentation means less bureaucracy and faster clearance.
– Electronic consignment notes primarily facilitate procedures and significantly speed up the exchange of documents between entities. This will translate into greater efficiency for companies and a reduction in their operating costs. PITD and GS1 cautiously estimate that this digitization will allow for a reduction of approximately 60 percent in administrative expenses in the transport industry.[1] In practice, this means easier inspections, fewer delays on routes, greater elimination of human errors, and better logistics planning. Moreover, according to the European Commission, the introduction of electronic consignment notes could bring over one billion euros in annual savings for the transport and logistics sector[2] – emphasizes Mateusz Włoch, Development and Training Expert at Inelo, part of the Eurowag Group.
Ambitious EC plans and obstacles to their implementation
Back in 2020, the European Commission adopted the eFTI regulation (EU 2020/1056 of July 15, 2020), which was intended to enable member states to develop digital data exchange systems. The plan assumed that the first eCMR platforms would launch in October 2024, and that from August 2025, inspections would be required to accept electronic documents. Meanwhile, the lack of key technical and certification regulations has caused delays of nearly two years.
So far, the European Commission has published three legal acts on this issue:
- Commission Implementing Regulation (EU) 2024/1942 of 5 July 2024 – laying down common procedures and rules for the access of authorities to electronic freight transport information.
- Commission Delegated Regulation (EU) 2024/2024 of 26 July 2024 – supplementing Regulation (EU) 2020/1056 by establishing a common eFTI data set.
- Commission Delegated Regulation (EU) 2024/2025 of 15 July 2024 – amending Part B of Annex I to Regulation (EU) 2020/1056, which allows economic operators to transmit information electronically while simultaneously meeting the requirements set out in both EU legal acts and national regulations.
– The provisions of the aforementioned regulations entered into force on January 9, which means that Member States can begin the first work related to eFTI. However, there is still a lack of regulations regarding the rules for platform certification and technical specifications for systems. The absence of these documents prevents advanced work at the national level. Without clear guidelines, member states cannot develop fully appropriate operating rules and systems, which slows down the entire process of introducing electronic consignment notes. For this reason, full implementation has been postponed to July 2027 – explains Mateusz Włoch.
Poland at a digital crossroads
In Poland, there is still a lack of legal regulations allowing for the performance of transport using electronic consignment documents. Currently, the applicable regulations require drivers to use paper transport documents during road inspections. However, at the end of 2024, the Ministry of Infrastructure presented a draft amendment to the Road Transport Act, which is intended to enable the use of electronic transport documents without the need for an electronic signature.
– This may accelerate the introduction of electronic consignment notes in Poland, which will significantly facilitate the operation of transport companies. Although the TSL industry still faces legislative work, clear progress can be seen in this area. The lack of an electronic signature requirement (compared to previous amendment proposals) may significantly facilitate the implementation of the solution, but the pace of legislation and the preparation of appropriate IT systems will be key. It is worth adding that steps towards the digitization of documents are also the result of actions taken by, among others, the Polish e-CMR forum, of which Inelo is a member – comments Mateusz Włoch.
The e-CMR Forum, established by GS1 Poland, enables dialogue between carriers, freight forwarders, and state authorities, making it possible to develop specific legislative solutions that will accelerate the digitization of transport.[3] It is worth emphasizing that the Polish project concerns not only road transport but also other modes of transport, such as rail, air, and inland waterway transport.
Technologies supporting eCMR
The introduction of eCMR is an opportunity for the further development of technologies supporting transport, such as transport management systems (TMS) or telematics. These tools are already helping to improve communication between drivers and headquarters, and in combination with eFTI platforms, they can significantly speed up logistics processes.
– Thanks to the integration of TMS-class systems with telematics, it is already possible to automatically generate the necessary documents and send them immediately to the headquarters. As a result, the driver does not have to worry about something getting lost on the road or information not being delivered on time. In turn, the forwarding department receives a package of necessary data immediately, and thanks to this, it can quickly settle accounts with the client for transport. The introduction of electronic consignment notes will be another step towards the full digitization of transport, supported by transport management systems – comments Tomasz Czyż, Chief Expert for Technological Solutions, Inelo, part of the Eurowag Group.
The European Commission expects that the e-CMR protocol will be fully implemented in all European Union countries in 2027. In the future, there are also plans to discuss the mandatory use of electronic documents only.
Let us recall that the implementation of the eFTI regulation has been divided into several stages:
- From January 2025: Member States can begin work on IT systems compliant with eFTI.
- By September 2025: The European Commission plans to adopt the missing implementation specifications, containing detailed functional and technical requirements for IT systems, including those regarding platform certification.
- From January 2026: Service providers and eFTI platforms can begin preparations for operation, and member state authorities can begin accepting data that will be stored on certified eFTI platforms for inspection purposes.
- From July 2027: Full implementation of eFTI. All member states will be required to accept information made available electronically by operators via certified eFTI platforms.
[1] PITD, e-CMR Are you ready?, 2022
[2] European Commission, Towards Paperless Freight Transport: EU takes a step forward with eFTI Regulation implementation, 2025
[3] GS1 Poland, e-CMR (Electronic Consignment Note)
Source: INELO Polska Sp. z o.o.








