Brexit has changed the nature of transactions involving the import and export of goods to and from the United Kingdom. Border crossing rules have also changed. What difficulties and procedures do entrepreneurs and the carriers working with them currently face?
Roman Andrzejewski, expert at the Łukasiewicz Research Network – Institute of Logistics and Warehousing:
1. The new nature of activities related to the import and export of goods to and from the United Kingdom
The previous nature of transactions involving trade with the United Kingdom was based on the principle of the free movement of goods. This not only eliminated any formalities at the border and associated charges (e.g., customs duties) but also significantly simplified the settlement of taxes accompanying these transactions. Both in terms of VAT and excise duty, this type of trade was part of the common settlement mechanism in the European Union, which involves paying tax at the destination and is based on uniform principles set out in directives. It also created new tax law institutions such as the intra-Community acquisition of goods (WNT) and intra-Community supply of goods (WDT).
Currently, the aforementioned trade is treated as an import (import from the UK) or export (export to the UK), and the territory of the UK forms a separate customs and tax area. As a result, trade with this area has gained a new name—extra-EU trade—and takes place on similar principles to trade with any other non-EU country. This is not changed even by the free trade agreement signed between the EU and the UK at the end of 2020. This agreement, like other agreements of this type, only clarifies issues related to the origin of goods and the reduction of fees for goods with such status.
Consequently, the new dimension of trade with the UK leads to, among others:
– the necessity to carry out additional formalities related to crossing the border – customs clearances,
– the obligation to pay import duties – customs duties,
– a new nature of tax settlements (import, export),
– longer border crossing times, and thus an extended goods flow process,
– the reinstatement of prohibitions and restrictions related to public order, safety, protection of life and health, protection of cultural property, and protection of endangered species, and thus difficulties in areas such as the transport of: waste, chemicals, ozone-depleting substances, genetically modified organisms (GMOs), cultural property, dual-use products, and firearms,
– the introduction of phytosanitary (plant-derived products), veterinary (animals and animal-derived products), and standardization (commercial quality control of food products) controls, as well as compliance with their requirements,
– new rules for labeling and marking goods (e.g., CE), and certification of notified bodies,
– the abolition and invalidity of existing permits and authorizations recognized in the EU common market (e.g., vehicle type approval),
– the compulsion to recognize professional qualifications previously acquired in the UK.
2. Rules for crossing the EU-UK border
Crossing the border requires completing customs formalities. These formalities must be carried out separately on the UK side and on the EU side.
These formalities may focus on:
– import or export clearances,
– placing goods under the transit procedure, which allows goods to be moved deep into the customs territory and declared for final clearance there.
To ensure that border crossings are smooth and do not block the movement of goods or activities at the border itself, it is recommended to use the transit procedure, specifically the transit procedures developed under international agreements to which the EU and the UK are signatories. This refers to transit procedures carried out under the Common Transit Convention (CTC) and the TIR Convention. Both modes apply to international transit, and thus operate in both aforementioned areas, and their benefit is the recognition of procedures opened in one country by the other party (country) to the convention. As a result, crossing the border involves recognizing the validity of previously initiated transit procedures, and at the border, it boils down to recording the flow of goods in the appropriate records (in the EU, this is, for example, the NCTS2 system).
The choice of one of the above options is voluntary and depends on the entrepreneur and the carrier working with them. The choice will depend on what is most appropriate for a given shipment, taking into account delivery time, cost, and the nature of the goods.
For all these procedures, safety and security declarations are also required:
– export summary declaration,
– import summary declaration.
These declarations are submitted in each of the areas involved in the movement of goods in the appropriate form (usually an electronic declaration) and with appropriate advance notice. During the transitional period, i.e., until June 30, 2021, the UK introduced certain exemptions from these rules.
3. Export of goods to the UK
a. Change in the method of transaction settlement
As already mentioned, export to the UK is treated as an export, and this leads in particular to:
– a change in the conditions enabling the application of the 0% VAT rate – there is an obligation to possess a customs document confirming the export of goods outside the EU territory (usually this will be an IE599 message obtained before the deadline for submitting the tax return for a given settlement period);
– a change in the moment the tax obligation arises – in the case of exports of goods, the tax obligation arises at the moment of delivery of goods, i.e., their release to the recipient, and not at the moment of issuing the invoice, as was the case until the end of 2020;
– the obligation to settle received prepayments, advances, and deposits – such prepayments must be included in tax records at the time they are received and settled for that period – certain conditions related to the export of the goods for which the advance was paid must also be met;
– the inability to use the call-off stock warehouse procedure for goods moved to the territory of another member state.
b. Place of export clearance
Export of goods from the EU requires export customs clearance. Export clearance must be carried out at the customs office competent for the supplier’s registered office or the place of loading of the goods. In special cases, clearance can be carried out in another place, e.g., on the way of transit or at the border itself. Declaring for the export procedure does not prevent initiating an international transit procedure, which will allow goods to be delivered to the recipient quickly and efficiently, limiting formalities at the border both on the EU and UK sides to the necessary minimum. Opening this procedure also allows for the closure of the preceding export procedure and the generation of confirmation that the goods have left the EU customs area.
c. Import into the UK territory
However, it must be remembered that export from the EU results in the import of goods into the UK territory. As a result, before leaving the European Union, during the collection of goods, the driver should receive all relevant information or customs documents and documentation allowing to confirm that:
– the seller (supplier) has fulfilled EU export procedures (possesses the MRN number of the EU export declaration),
– the buyer (recipient) has met all of the UK’s import requirements.
Regarding imports into the UK, it should be pointed out that import procedures depend on the nature of the goods.
Thus, controlled goods (sensitive goods, i.e., subject to phytosanitary or veterinary control, as well as excise goods or chemical substances) should be reported on an ongoing basis at the border office or inland border control point, and the driver should possess an MRN number, referred to as the UK entry number. Until April 1, 2021, derogations from these rules are possible.
Other goods introduced into the UK territory can, de facto, be cleared according to the generally available so-called Simplified Procedure (Customs Freight Simplified Procedure – CFSP), consisting of making a formal declaration within 6 months from the date of import. At the time of collection, the goods should only be entered in the recipient’s commercial records (simplified declaration). Therefore, it is sufficient for the carrier to possess the recipient’s UK registration and identification number (EORI number). This state is to remain in force until June 30, 2021, and after this date, the UK recipient should already be using a permit for their simplified procedure, which they should have obtained during the aforementioned transitional period.
Furthermore, the UK buyer can take advantage of the postponed VAT accounting mechanism, where import VAT can be settled in the tax return instead of being paid directly to customs authorities at the moment of entry into the United Kingdom.
4. Import from the UK
a. Changes in the method of transaction settlement
It was previously indicated that the acquisition from an entrepreneur of goods shipped or transported from the UK to the territory of Poland constitutes an import of goods, covered by the requirement to file a customs (import) declaration and settle VAT in Poland. The nature of this transaction leads to:
– a change in the moment the tax obligation arises – the tax obligation for the import of goods arises at the moment the customs debt is incurred, and not upon issuing an invoice, as was the case until now, i.e., even before Brexit;
– the possibility of applying a simplification authorizing the settlement of VAT due on the import of goods in the tax return filed for the period in which the tax obligation for the import of these goods arose (upon meeting the conditions specified in Article 33a of the VAT Act);
– a change in the rules concerning the taxable base – the taxable base for the import of goods is the customs value increased by the due customs duty and possibly excise duty;
– the inability to use the call-off stock warehouse procedure for goods moved to the country’s territory from other member states;
– the inability to use the simplified procedure for intra-Community triangular transactions with the participation of taxpayers identified for the purposes of such transactions in the UK.
b. Place of import clearance
Goods imported to Poland can be cleared and cleared through customs at any office within the EU, so these activities can take place at the customs border itself, at an office located along the transport route (e.g., in Germany), or at a domestic customs branch. In the case of clearances in the country or on the way, it is necessary to place the goods under the transit procedure (T1 procedure) at the border, unless the goods are moving under the coverage of an already opened international transit procedure (CTC, TIR). Crossing the border also requires prior submission of an import summary declaration related to safety and the security of goods trade (ICS system).
Note! Final clearance for imports carried out in other countries should, in principle, be carried out by a tax representative (an agency and freight forwarder that acts as both a customs representative and a tax representative) – procedure code 4200. This will protect against paying import tax due in the country of clearance.
c. Export from the UK
Before goods are imported into the EU, they must first leave the UK territory. Consequently, they must be declared there for the export procedure. This obligation will rest with the British supplier, who should declare the goods for the export customs procedure (this will be, for example, a combined customs declaration containing safety data). The driver must present the goods at the British customs office. Only then will the exporter receive permission for further activities (Permission to Progress – P2P), and the driver will be able to transport the goods to the British port or terminal of exit. Nevertheless, it is not necessary for the driver to have proof of British export documentation. It is enough that they know the number of this operation assigned in the British export declaration system.
d. Facilitations in the Eurotunnel
And one more indication related to improving the import of goods into the EU. This concerns the movement of goods through the Eurotunnel. France has implemented a smart border system to handle trucks using ferry crossings and travel through the Eurotunnel. It assigns data from the customs declaration to the registration number of the vehicle carrying the shipment. During clearance at ferry terminals or at the service station (“pitstop”) in the Eurotunnel, the driver presents the MRN number of the import procedure under which the goods were declared (T1, CTC, import). The MRN number will be scanned and associated with the vehicle registration number (VRN) or the trailer registration number (TRN).
You can read which documents must be scanned at the “pitstop” here.
Scanning documents allows for the recognition that the imported goods already have a regulated legal situation (they have been declared for the appropriate procedure). At the same time, it allows for a smooth border crossing at this location and avoids creating congestion.








