Even though the tachograph is digital, it cannot do without manual entries. There are a number of situations that require data to be entered manually. What might these situations be?
<\/strong><\/p>
Rafał Frejtag, Inelo expert<\/strong><\/strong><\/em><\/strong><\/em>: Truck drivers often and regularly ask questions about logging their card into the tachograph. Over the course of four months, the hotline of the National Center for Driver Accounting (OCRK) received 103 calls with just such doubts.1<\/sup> Non-standard situations, mistakes, or simply a lack of knowledge regarding the use of the tachograph and regulations clearly defining the path of action in the event of an error expose carriers and drivers to the risk of financial consequences. Meanwhile, there are many solutions that can prevent potential crises.
Fundamental principles<\/strong>
Possession of a driver card is necessary to drive vehicles with a GVW exceeding 3.5 tons. On these media, the activities performed by the truck driver are recorded using the recorder, thanks to which it is possible to check their working time and rest periods during the day during an inspection. Each person authorized to drive trucks may use only one current and personalized card. Although a driver should only use their own document, it often happens that they use someone else’s cards, thereby violating the regulations regarding working time standards. For such an offense, a trucker faces a fine of 2000 PLN, and the company may be charged with a penalty of 3000 PLN. It is the driver’s duty to record all their activities on the card during the working day. It cannot be removed from the data recording device, as regulated by the provisions. However, the same regulations indicate cases in which it may happen that the document is disconnected. When? Article 34 of the EU Regulation No. 165\/2014 does not precisely specify this: “The record sheet or driver card shall not be removed from the recording equipment before the daily working period is finished unless its removal is otherwise authorized.”
Permissible cases<\/strong>
When can we then remove the card from the tachograph? Of course, the card may be removed from the tachograph after the driver’s working day has ended, although this is not mandatory, as in a situation where the medium remains in the recorder, the employee’s rest will be recorded. However, one must remember that the driver card is the basic document constituting the source of information about the time and course of work, therefore it should be left exclusively at the disposal of the driver indicated by name on the front of the medium.
What if the card has been removed?<\/strong>
There are activities that can be recorded manually on the driver card – using the tachograph when inserting the driver card. In this way, a trucker can note activities such as: periods of other work, availability, breaks, or rest. A very important aspect is to fully complete the time so as not to leave unplanned and undescribed moments and events during the working day behind the wheel, which will be considered during an inspection as so-called “blank periods”. “ATTENTION! Removing the card during a rest or break may be counted as an interruption of this activity, for which consequences may follow.”
What if a manual entry is missing?<\/strong>
In a situation where the driver has not made a manual entry, it is necessary that they have information saved in another form on how their time not registered in the tachograph was utilized. Therefore, if it was not possible to make a manual entry, the vehicle operator must have a so-called “holiday leave form,” i.e., an attestation of driver activities issued by the carrier. In this document, the entrepreneur indicates the type of activity the trucker performed during the period not covered by the tachograph.
Inspection? Start time!<\/strong>
Another situation in which the driver card is removed from the tachograph is a road inspection. Article 34 of Regulation 165\/2016 imposes an obligation to present the document to authorized bodies: “If the driver drives a vehicle equipped with a digital tachograph, they must be able to present, upon request of an authorized inspection officer: (1) their driver card.” It is worth knowing that reading data from the card does not have to be synonymous with removing it from the recorder, as there are devices available that allow for reading via the tachograph without the need to remove the document. However, if during an inspection, at the inspector’s decision, the driver card must be removed from the data recording device, one must remember to make an appropriate manual entry after the inspection is completed, which will specify the circumstances of the situation in which the document was not available in the tachograph. In the case of card reading by companies, remote reading via the internet is becoming increasingly popular, without the need to remove the card from the tachograph. For a carrier to use such solutions, it is necessary to equip the vehicle with appropriate devices. Most often, these are advanced telematics systems that provide such functionalities.
A serious matter<\/strong>
It is the carrier’s duty to ensure the driver has the opportunity to acquire skills and knowledge regarding the recording of working time and the operation of the tachograph, as stated in Article 33 of the aforementioned Regulation 165\/2014. Truck drivers who do not comply with the guidelines regarding the recording of activities on the card should count on penalties imposed not only on them but also on the entire enterprise. For example, for the lack of an entry of the country of commencement\/end of the daily working period or the lack of a manual entry, the driver may be charged with a penalty of 100 PLN for each day, and the enterprise 50 PLN for each period in which a manual entry does not appear. Moreover, according to the schedule of fines, since September 2018, such an offense is considered a very serious infringement. If a person operating a truck equipped with a digital tachograph does not possess a current driver card, during an inspection, they must count on a penalty of 500 PLN, while the carrier, in accordance with the current schedule, may be charged with a penalty of 2000 PLN. Regulations do not always clearly delineate the path of action in given circumstances, which can often confuse the driver and the carrier. In atypical situations, it is worth consulting with companies specialized in calculating driver working time, which will help in choosing a safe path for further action.
<\/p>
1<\/sup> Internal OCRK research conducted on the basis of 2039 conversations in the period 01.09.2018-24.01.2019.<\/p>







