Criteria for assessing the condition of used EUR flat wooden pallets

EUR flat wooden pallets are manufactured in many European countries based on requirements specified in the UIC 435-2 leaflet, “Norme qualitative pour une palette plate européenne en bois, à quatre entrées, de dimensions 800 mm x 1200 mm.” The appearance of a 800 mm x 1200 mm, four-way entry, wingless, single-deck EUR flat wooden pallet manufactured according to UIC 435-2 leaflets (in Poland: PN-M-78216:1997) is shown in Fig. 1.

Criteria for assessing the condition of used EUR flat wooden pallets

According to the UIC 435-2 leaflet (PN-M-78216:1997), the following markings must be applied to the visible front faces of the side longitudinal bearers of the pallet:

– EUR mark in an oval on the right bearer,
– Railway authority mark on the left bearer,
– Digital or alphabetical manufacturer code 000-0-00, 20 mm high, on the center bearer, where the individual groups signify:
– first: manufacturer identifier (digits or letters),
– second: last digit of the year of manufacture,
– third: month of manufacture.

All manufacturers producing, wishing to produce, or repairing EUR pallets must hold a production license, and their products must meet the requirements of the UIC 435-2 leaflet. The necessity for a license stems from the fact that the EUR mark in an oval and the mark of the railway or other authorized entity are legally protected, and only authorized manufacturers may produce them. Currently, the only organization in Poland authorized to grant licenses for the production and repair of EUR flat pallets is the Polish National Committee of EPAL. Ensuring the appropriate quality of EUR pallets is only possible through the operational and consistent monitoring of their production at manufacturers, especially licensed ones, in accordance with the criteria (requirements) specified in the UIC 435-2 (PN-M-78216) leaflet by an entity authorized by the UIC.

During the use of EUR pallets, it is necessary to consistently monitor their technical condition. The criteria for assessing the condition of used EUR flat pallets are defined in the International Union of Railways leaflet UIC 435-4 Réparation de palettes plats Criteria for assessing the condition of used EUR flat wooden pallets et box-palettes <> Criteria for assessing the condition of used EUR flat wooden pallets (there is no Polish equivalent). This document is not widely available, which is why many users of EUR flat pallets have problems with the correct assessment of their technical condition during operation.

According to this standard, EUR flat pallets possessing any of the following defects (damages) should be withdrawn from service:
1) one board is missing or broken, or a stringer is broken – examples in Fig. 2,
2) one bottom or top outer board has a loss such that more than two nail or screw shanks are visible – examples in Fig. 3,
3) more than two outer boards (top or bottom) are damaged such that the shank of one nail or screw is visible in the board – example in Fig. 4,
4) one bearer is missing, split, or has a loss such that one nail or screw shank is visible – examples in Fig. 5,
5) one railway/authorizing organization mark or one EUR mark is missing or illegible – Fig. 6,
6) unacceptable structural elements were used for repair (boards, stringers, or bearers that are too thin, narrow, or short),
7) the general condition is poor because:
– the permissible load capacity is not maintained (boards, stringers, or bearers are rotten, or several boards, stringers, or bearers are damaged),
– the cargo could become soiled.
Wooden flat pallets withdrawn from service can be subjected to repair or scrapping. However, economic considerations should determine the further course of action.
If the cost of repair is lower than the purchase cost of a new pallet, then it is advisable to carry out a repair. A pallet after repair should possess the characteristics of a new pallet, especially in terms of strength.
If, however, the cost of repair is equal to or higher than the price of a new pallet, then a new pallet should be purchased. The final choice, however, rests with the pallet owner.

Criteria for assessing the condition of used EUR flat wooden pallets

Criteria for assessing the condition of used EUR flat wooden pallets

Criteria for assessing the condition of used EUR flat wooden pallets

Criteria for assessing the condition of used EUR flat wooden pallets

Criteria for assessing the condition of used EUR flat wooden pallets

Criteria for assessing the condition of used EUR flat wooden pallets

Palety_EUR.pdf