
Kardex Mlog has supplied Bridgestone Poznań with an automated high-bay warehouse for 3,560 pallets, including a service package and an extensive conveyor system.
The construction conditions were very demanding. The stacker cranes, 31 m high and weighing 13 t, had to be pulled through a roof hatch into the 35 m high warehouse building in one piece, under very limited spatial conditions. This operation was prepared down to the minute and was one of the final steps of the warehouse expansion, which Kardex Mlog carried out on behalf of Bridgestone at the Polish production plant in Poznań between January 2020 and June 2021.
Conveyor system with 98 drives
Kardex Mlog built a double-deep racking system on the site for storing pallets with raw materials for car tire production. Each of these four-way entry pallets can carry up to 1.4 t. Mounted on top are steel load platforms with a footprint of 1700 x 1100 mm, weighing 100 kg each. The height of the load units with the rubber compounds stored on them is up to 1500 mm. The highly flammable raw material requires the use of a sprinkler system certified according to NFPA 13 inside the racks. NFPA stands for “National Fire Protection Association”. NFPA 13 contains guidelines for the design and installation of sprinkler systems.
The fire protection system was included in the scope of delivery, as was the conveyor system with 98 drives for three floors of the building. Automatic storage and retrieval of raw materials takes place on the two lower floors using six conveyor lines. While the two lower warehouse levels supply production, the upper level with three additional conveyor sections is intended for handling samples as part of quality control. Here, Kardex Mlog created special quality control stations where material can be taken for inspection.
Future growth potential
The three Kardex MSingle B stacker cranes designed by Kardex Mlog reach a maximum travel speed of 240 m/min – this was optimized specifically for this project according to operating conditions. The single-mast stacker cranes are designed for loads of up to 1.4 t and reach lifting speeds of up to 100 m/min.
Another unique solution is the identification technology: Two RFID chips are embedded in the runners of Bridgestone’s pallets to ensure process reliability. “Barcodes were out of the question because their long-term readability could not be guaranteed in harsh production conditions,” says Manuel Engel, who works in the sales department at Kardex Mlog. RFID redundancy ensures 100% chip readability even if one of the two tags fails, which would not be possible in the environment of a metal pallet in any other way.
Optimal article retrieval sequence
When loading into the warehouse, the article data stored on the chips is read and transmitted to the Kardex Control Center control software, also supplied by Kardex Mlog. It checks this data for compliance with previously received information. Kardex Control Center is a modular warehouse management system. It handles warehouse management and controls the flow of raw materials at Bridgestone. Kardex Control Center calculates the optimal retrieval sequence from the warehouse, e.g., depending on the expiration date or different rubber compounds.
The Kardex MVisu visualization, an integral module of the Kardex Control Center, graphically represents the conveyor automation, including storage and retrieval lines and transfer conveyors integrated into the steel rack structure. These allow for the transport of pallets between individual aisles, which optimizes warehouse filling and makes storage and retrieval processes more flexible. In this way, for example, stacker cranes can be utilized more evenly and relieve each other in case of bottlenecks. The visualization enables interactive operation of the material flow system – from contextual data processing of the location to information in case of failures. The warehouse management system is connected to the controller automation via a standardized interface, ensuring constant data exchange between the systems.
Shared database
The connection between production and the high-bay warehouse is operationally automated using unmanned transport systems, whose master material flow control is connected to the Kardex Control Center via an interface. Warehouse stocks are saved by the Kardex Control Center in a shared database. Alternatively, driver-operated trucks can also be used. To enable this type of flexibility, the transfer stations of the conveyor system have been equipped with lifting rotary tables. This allows pallets to be picked up longitudinally (for trucks) or transversely (for AGVs).
The automated high-bay warehouse has a dedicated service package tailored to Bridgestone’s needs, including a hotline, maintenance, and spare parts delivery from the Life Cycle Service department. In the event of technical problems that cannot be solved remotely, service technicians from the Polish Kardex Mlog branch, established in 2021, arrive on-site within just four hours. Experience shows, however, that in over 96% of rare interventions, the solution is found remotely. Life Cycle Service supports logistics systems throughout their entire service life, ensuring maximum uptime and constant technology updates.
Source: Bridgestone







