
Sixty years after the start of production, the DAF Trucks Vlaanderen facility is one of the most advanced automotive plants in Europe. The production of truck cabs, launched in 1966, gave rise to a state-of-the-art factory for both bodies and axles, playing a key role in DAF Trucks’ international production network. Thanks to continuous investments in technology, sustainability, and employees, DAF holds an important position in the Belgian industry.
To meet the growing demand for DAF trucks, production facilities had to be expanded in the mid-1960s. Although there was enough space at the Eindhoven plant, the availability of workers was limited. Therefore, DAF chose the Belgian Kempen region, where – after the closure of mines and regional diamond grinding shops – a suitable workforce was available. A 400,000 m² area was acquired along the A13 motorway in Oevel. The purchase agreement was signed on Christmas Eve 1964. Construction of the 12,000 m² factory began almost immediately, and it became operational in the first half of 1966.
“Made in Belgium”
Since 1966, DAF trucks have been an important part of Belgian production – the first four cabs left the plant on May 5 of that year. Production grew rapidly, as evidenced by the fact that by July 5, the thousandth cab had already been delivered from Oevel to Eindhoven. On August 26, the DAF Vlaanderen factory proudly announced that it was already able to produce “every type of body.” In the meantime, the new paint shop was already running at full capacity. On December 1, two impressive Müller presses were moved from Eindhoven to Belgium. This process took two months, but it finally made the factory truly “self-sufficient.” Just a few months later, DAF decided to expand the cab factory, preparing for the introduction of a new generation of trucks with a revolutionary tilting cab in 1968.
Axle production also moved to Belgium
The high quality of the cabs produced by the DAF Vlaanderen plant was the reason why the rapidly growing DAF company also moved its axle factory to Westerlo in 1971. A new 13,000 m2 facility was added to the existing production line, increasing the length of the buildings along the motorway to an impressive 380 m. The number of employees gradually grew to one thousand.
In 1985, the DAF Vlaanderen plant recorded further massive investments. A brand-new cab paint shop was built, which at the time was the most environmentally friendly in Europe. Less than three years later, significant innovations were also introduced in the axle factory to guarantee even higher product quality and efficiency. DAF axles are developed and produced in-house, so they are always tailored to the specific vehicle type, ensuring maximum efficiency.
New generation DAF trucks
Investments in DAF’s axle and cab factory have continued over the last decade. Over the past 10 years, more than 650 million euros have been invested in Westerlo, mainly to support the recently introduced all-new generation of trucks. These are the first trucks on the market developed from the ground up to utilize the latest European vehicle mass and dimension regulations. The DAF XD, XF, XG, and XG+ models received the “International Truck of the Year 2022 and 2023” title, setting new standards in efficiency, safety, and driver comfort. The electric versions of the XD and XF models won the prestigious award for 2026 – their axles and cabs are also produced in Westerlo.
Impressive investments
One of the most spectacular examples of recent investments is the opening of a state-of-the-art body paint shop nearly 150 meters long, capable of applying three thousand different colors. Ultra-modern painting robots ensure the highest level of quality with minimal paint consumption. An important aspect of the project was reducing the environmental impact: advanced painting systems allowed for a 50% reduction in emissions. The latest technologies are used to clean the air leaving the paint booths.
A completely new cab factory was also built. In the body shop, approximately 145 robots work in sequence to fully automatically produce cab skeletons, which are then finished according to customer requirements. Special attention was paid to ergonomics and optimal working conditions: plenty of light, minimal noise, and the ability to change the vertical position of the cab are just a few examples of solutions facilitating daily tasks.
In the axle factory, fully automated production lines have been introduced over the last decade to increase efficiency, further improve quality, and optimize working conditions. The axle paint shop has been completely modernized, and advanced robots significantly reduce paint consumption and environmental impact.
“Factory of the Future”
It is this combination of continuous investment in technology and innovation, as well as a strong focus on sustainability and an ergonomic work environment, that led Agoria – the Belgian technology federation – to award the DAF Vlaanderen factory the “Factory of the Future” title in 2024.
Customer-order-based production
As with all other DAF factories, the DAF Vlaanderen plant produces axles and cabs according to the “just-in-time” principle. This means that these components are delivered to the DAF assembly plant in Eindhoven and to Leyland Trucks in the UK at the right time and in the right sequence, based on customer orders. The PACCAR production system assumes that there is always room for further improvement, and employees know better than anyone else how their tasks can be performed even better, smarter, and more efficiently. In 2021, the 3-millionth axle produced in Westerlo rolled off the production line, and this year DAF Vlaanderen will produce its 1.5-millionth cab.
“A fantastic recognition”
Sixty years of production in Belgium is a tribute to generations of employees who have transformed the DAF factory in Westerlo into what it is today: a state-of-the-art, future-oriented production facility. Of course, it is also a fantastic recognition for our 2,000 employees and 1,000 suppliers, including about 400 in Belgium. Thanks to their dedication and commitment, we are able to build trucks that lead the industry in terms of reliability, comfort, and quality.” Thanks to constant investments in DAF Trucks Vlaanderen N.V., our Belgian plant has a bright future ahead.
– stated Jos Habets, member of the DAF board responsible for production.
Source: DAF








