
In the world of heavy transport, where every minute and every kilogram of cargo counts, technologies that remain invisible at first glance play a key role. We are talking about advanced hydraulic systems installed in tractor units. These are the heart and driving force for self-unloading semi-trailers, commonly known as tippers, and innovative moving floor semi-trailers, as well as agricultural semi-trailers.
These systems, using the principle of transferring enormous forces via high-pressure oil, have revolutionized the way bulk, agricultural, or municipal goods are loaded and unloaded. Thanks to them, work that once required the involvement of many people and heavy equipment is now done quickly, efficiently, and safely.
How does it work? The magic of pressure in practice
The heart of every hydraulic system in a heavy vehicle is a hydraulic pump, usually driven by the power take-off (PTO) of the tractor’s gearbox. The pump pushes special hydraulic oil through a distributor from the tank to the PRESKO cylinders, which are the true “muscles” of the entire system. It is they that, under the influence of enormous pressure, perform the work – lifting the tipper’s cargo box or setting the moving floor slats in motion.
In the case of tipper semi-trailers, the process is relatively simple yet extremely effective. Hydraulic oil, forced into a powerful telescopic cylinder, causes it to extend, which in turn leads to the lifting of the front part of the cargo box. As a result, the entire load, whether sand, gravel, or grain, slides down by gravity at the designated spot. The operator, using precise controls, can stop or control the tipping speed at any time.
– says Remigiusz Zabolski from HEWEA.
Moving floor semi-trailers are a more advanced solution, ideal for transporting lower-density materials such as wood chips, peat, and even municipal waste.
Here, the hydraulic system powers a set of cylinders moving the floor slats longitudinally. The unloading process takes place in cycles – all slats move backward simultaneously, shifting the load, and then retract in groups without disturbing its position. The entire process is fully automated and allows for safe unloading even in low halls or on unstable ground, where the use of a traditional tipper would be impossible.
– explains Remigiusz Zabolski.
Key components and installation
Installing a hydraulic system in a tractor unit is a task for specialized service centers. In addition to the aforementioned pump, a hydraulic oil tank is also necessary, usually mounted on the side of the vehicle frame or behind the driver’s cab, as well as a distributor that directs the oil flow, allowing for precise control of the semi-trailer’s functions. Furthermore, high-strength hydraulic hoses are important, which must safely transport oil under pressure reaching even several hundred bars, as well as quick-connect couplings – valves enabling easy and tight connection of the tractor’s hydraulic system with the semi-trailer.
It is also worth remembering the controller, which is the operator’s tool for controlling the cylinder extension via a system of pneumatic hoses connected to the distributor and PTO. Selecting the right components, such as pump efficiency or tank capacity, is crucial for the optimal and trouble-free operation of the entire set. Different parameters will be required for operating a standard tipper and others for powering a moving floor.
– adds HEWEA expert Krzysztof Leś.
The semi-trailer market facing changes – hope after years of decline
The condition of the power hydraulics industry is inextricably linked to the situation on the semi-trailer and trailer sales market. The last few years have been a period of major fluctuations for this sector in Poland. After record years 2021-2022, when about 46,000 new vehicles were registered, a time of clear slowdown followed.
The culmination of the declines occurred in 2024, when the market shrank by as much as 30% compared to the previous year, and the number of registrations fell to just 27,393 units. This sharp decline was most strongly felt in the dominant segment of heavy semi-trailers with a gross vehicle weight of over 16 tons, used mainly in long-haul transport. The number of their registrations fell from nearly 35,000 in 2021 to just 20,000 in 2024. However, it is worth noting that not all segments suffered to the same extent. Niche markets, such as special, agricultural, or the aforementioned moving floor semi-trailers, proved more resilient, recording declines at the level of 10-15%. Vehicles with lower load capacity also showed relative stability.
– lists the HEWEA expert.
The year 2025 brings the first symptoms of recovery. We are observing a change in the negative trend and recording minimal growth compared to the difficult year 2024. However, we agree with the market voices – this is just the beginning of the road to market recovery. Returning to the impressive sales volumes of 2022 or 2023 will take some time. This cautious improvement in the economic situation is, however, a positive signal for manufacturers and installers of hydraulic systems, whose products are key to the functionality of many of these specialized vehicles. Hydraulic systems are also installed in used vehicles, which prevented as large a drop in sales as in the case of semi-trailers.
Advantages and the future of power hydraulics
The use of power hydraulics in heavy transport brings a number of benefits. First and foremost, it is a huge saving of time and labor costs during unloading. Processes that once took hours can now be completed in a dozen or so minutes. Moreover, these systems guarantee a high level of safety, eliminating the need for manual unloading and minimizing the risk of accidents.
Modern hydraulic systems are increasingly efficient, lighter, and more reliable. Manufacturers are competing to offer solutions that allow for even faster work with lower fuel consumption. The use of advanced control systems, including wireless remote controls, further increases operator comfort and safety.
Under the PRESKO brand, you can get reliable and proven hydraulic systems that are composed of the best elements adapted and tested in operation. Although they are invisible, more than 850 such systems are installed in our brand’s heavy vehicles every year.
– summarizes Remigiusz Zabolski from HEWEA.
In an era of growing pressure for efficiency and optimization in the TSL industry, power hydraulics remains an irreplaceable technology. It is a silent hero that proves every day that true strength lies in precision and innovation.
Source: HEWEA sp. z o.o.







