⚙️
🌟 Najlepsze dopasowanie
Wpisz szukaną frazę, aby zobaczyć propozycje AI.

Speed bumps as a traffic calming element

Photo: Pixabay

Speed bumps – definition and types
A speed bump is a traffic calming device, usually in the form of a transverse protrusion on the road surface. Its purpose is to limit the speed of vehicles traveling on the road where it has been installed.

Driving over a speed bump at a speed above the limit results in the car’s wheels being jolted and causes discomfort for both the driver and passengers, which (in theory) forces them to drive over it at a limited speed, usually 20 or 30 km/h. The material used to make speed bumps is usually rubber or concrete paving blocks. Locations where speed bumps are present on the road are marked with the A-11a sign.

The concept of speed bumps is constantly being developed. The goal is primarily aimed at reducing the inconvenience associated with vehicles traveling at the permitted speed driving over the bump. Several proposed solutions are presented below:
– a bump with a hinge in the middle and a shock absorber with parameters selected so that the bump flattens during a slow passage and remains convex when passing at a higher speed;
– a bump in the form of a sleeve filled with liquid that disperses during a slow vehicle approach and provides resistance when approached at high speed;
– a bump with an elastic surface that collapses when a heavy vehicle, e.g., a bus, passes over it, but remains in place when a passenger car passes. This reduces the vibrations that occur when heavy vehicles pass over speed bumps and increases the comfort of public transport passengers.

In addition to the commonly known ones presented above, other types of speed bumps are also used. Such unconventional speed bumps include:
– a pin – this is a bump used at intersections, in the form of a round protrusion in the middle of the intersection with a diameter selected so that the passage through the intersection takes place partially over the bump. An intersection with a pin-type bump is very similar to a mini-roundabout, but differs from it in that circular traffic does not apply there.
– a cushion – this is also a bump used at intersections. It differs from the pin-type bump in shape. The cushion-type bump is rectangular in shape. Unlike an intersection with a raised surface, it does not cover the entire intersection area, but only its central fragment.
– an island bump (also referred to as: bus-friendly or Berlin cushion) – this is a speed bump, most often in the form of a rectangular protrusion on the road, with a width that allows a bus to pass over the bump (without affecting the bus’s movement), but not passenger cars, due to their narrower wheel track.

The full article is available below in PDF format.

 

We wrote more about transport in Logistyka magazine 2/2018.
The e-edition of the magazine is available in our offer!

Speed bumps as a traffic calming element

L2018-2s24.pdf