
Improving safety, reducing the frequency of inspections, and combating the plague of manipulation. From mid-June 2019, by decision of the European Commission, 4th generation tachographs, known as smart tachographs, will be installed in all new trucks, buses, and coaches covered by the regulation within the EU. Although the changes may not be visible from the outside, the functionality of the devices will change significantly.
At this year’s IAA trade fair in Hanover, 4.0 tachographs were presented. In accordance with Regulation 165/2014 of the European Parliament and of the Council of 4 February 2014, the devices will be installed in new trucks in the European Union from mid-June 2019, and in other trucks in international transport from 2034. It is worth recalling that since 1 May 2006, carriers have been required to install digital tachographs in new trucks, which have undergone changes since then:
o from 2006, 1st generation digital tachographs
o from 1 October 2011, 2nd generation digital tachographs
o from 1 October 2012, 3rd generation digital tachographs, which are used to this day
o from 15 June 2019, 4th generation digital tachographs, so-called smart tachographs
New tachographs – new quality
Smart tachographs are the European Commission’s response to the plague of fraud and frequent tachograph manipulation. The European Commission states that for every 100 trucks inspected, on average, one in seven drivers had interfered with the tachograph record.
– Drivers, despite severe penalties – amounting to as much as PLN 10,000, break the rules regarding compliance with driving time standards, which significantly affects the level of road safety. 4th generation tachographs will be much better secured, which will prevent the driver from interfering with the device’s record – says Mateusz Włoch, an expert at INELO.
New tachographs will not only limit the possibility of driver manipulation in driving time registration but will also streamline and reduce the number of inspections because the Road Transport Inspectorate or other road transport control services will be able to perform remote pre-selection. Inspectors, using short-range devices, will be able to read data from the vehicle necessary to detect manipulation. In case of doubt as to whether regulations have been violated, the vehicle will be stopped for inspection.
What changes do the new tachographs bring?
In the over five-hundred-page regulation of the European Commission, 6 most important changes are outlined that the new tachographs will introduce. The most significant of these is equipping the smart tachograph with a positioning system. The device will record and save the starting point of the route, the end point of the journey, and every location from the moment driving starts, every three hours. The tachograph will not record the entire route, but only its points.
– This is perfectly illustrated by an example in which the vehicle’s route between two points recorded by the tachograph is shorter than the shortest possible travel path on that route. The inspector will have grounds to subject it to a detailed analysis – explains Mateusz Włoch from INELO. – It is precisely this recording system that will allow for curbing the practice of using foreign driver cards, disrupting records by tachographs, or even forging transport documentation – adds the INELO expert.
The 4.0 tachograph is also a huge convenience for the driver. In addition to satellite connectivity, the device can be integrated with an external ITS system to automatically download data from the vehicle itself and inform the driver about important issues, including vehicle axle load or potential faults.
Another very important change is the aforementioned possibility of remote vehicle inspection. The Road Transport Inspectorate will be able to inspect vehicles in motion and assess whether there are grounds to stop a given truck.
Data from the tachograph will be processed on an ongoing basis and transmitted in real-time to the carrier using an ITS application. The company will also be able to download location data from GNSS and gain access to information regarding driving parameters (working time, vehicle speed, and distance traveled) and vehicle parameters (including faults or vehicle axle load). In the future, advanced ITS systems will also inform the driver about any hazards.
– Currently, such solutions are used in a wired manner. However, the information obtained is limited and incomplete. An innovation in smart tachographs will be the wireless transmission of all data acquired by the tachograph – using Bluetooth – explains Mateusz Włoch.
Another change is giving smart tachographs an expiration date. The validity of the certificate assigned to a given device will be 15 years. After this time, the carrier will be obliged to replace it.
Along with smart tachographs, new driver cards will come into use. However, there will be no need to replace old cards. Cards that have been used by drivers so far will be compatible with the new devices, just as new cards will be with older tachograph models. In the case of company cards or workshop cards, it will be necessary to obtain new ones that will work with the new tachograph models.
The changes do not end there
Although 4.0 tachographs are not yet in use, the European Commission is already discussing subsequent generations of devices. They would, among other things, record border crossings to limit abuses in cabotage transport and regulate minimum wage issues. The European Commission’s attention is also occupied by the too long time (15 years) for installing a new generation of tachograph in older vehicles.
Most likely, the devices will appear on the market this year. Although carriers and drivers are full of concerns related to the introduction of smart tachographs, they will certainly contribute to improving road safety and will curb fraud and manipulation related to driver working time.
Source: OCRK







