Modeling control for induction transport vehicles

In the case of induction transport, technical development makes it increasingly easy to modify the layout of vehicle routes to adapt them to current transport needs. A more serious difficulty is associated with the need to adapt control to a changed route and traffic intensity. The paper presents the possibility of creating a programming language for the purpose of controlling a specific device. In particular, for the needs of controlling an induction transport system, a programming language created for the needs of controlling conveyor transport systems was modified. The programming language was applied in a conveyor transport system simulator. The control program in the model can be directly used in a real transport system. Such an approach allows the user to independently adapt the transport system control program to current needs.1. INTRODUCTION
In the area where it is planned to move loads using induction vehicles, so-called induction loops are placed, along which the vehicles move
[3,5]. Individual routes differ in frequency, which is recognized by the vehicle’s drive system. After starting the vehicle at the set line operating frequency and switching on the line power supply, the vehicle moves along the wire forming the induction loop. Places are prepared on the route where the vehicle can stop. In such places, loads are loaded onto the vehicle or removed from it. The movement of the vehicle can be initiated by an operator or take place in an appropriate time rhythm enabling loading and unloading. Automatically controlled vehicles seem very attractive [4].
Designing a transport system consists not only of determining the routes along which the vehicles move. It is also necessary to determine the number of vehicles enabling the realization of incoming transport tasks. Each task specifies the place of picking up the load and the place of its unloading. On this basis, for a given stream of loads, the labor intensity of the transport task can be determined. This consists of determining the time needed to move the loads. After taking into account the return path that the vehicles must travel to pick up the load again, the demand for transport work is determined. It is necessary to take into account whether the vehicle can pick up one or more load units and whether these are units on the same route or on different routes. (…)

The article contains 30048 characters.

Source: Czasopismo Logistyka 2/2011

Modeling control for induction transport vehicles – PDF file for download